OpBrickFinder Running 1.8

From AstroNuWiki
Jump to: navigation, search

Before runnig, once time per session you should set envirenment variables for OpRelease package:

  #cd /path_to_oprelease/OpRelease
  #source setup.(c)sh
  #cd 3.2/OpBrickFinder/v1r8/cmt
  #source setup.(c)sh

If you are using your local directory, you should only go to this directory and execute

  #source opbf_setup

OpBrickFinder

To run the brick finding program, go to the directory $OPBRICKFINDERROOT/run, and perform:

  #./brickFinder.exe 

with the following comand line options:

-D : Maximum PrintLevel
-e <eventNumber> : Event number
-i <fileName> : ROOT intput file
-F # : First Event Processed (default: first event in file)
-n # : Number of events to be processed
--data <path> : Path to input data files directory (default: data/extractions)
--list <fileName> : File list name (default: data/files_list.dat)
--elist <fileName> : Events list file name
--config <fileName> : Config file name
--muonRec <-1 - 4> : Muon reconstruction method
-1 - Automatic (default)
0 - Data file muon
1 - Hough transform
2 - Tracing method 1
3 - Tracing method 2
4 - Data file muon (without fitting)
--trainingMode : learning neural network mode
--buildBrickMap : rebuild map of brick
--notBuildBrickMap : do not build map of brick
--notBuildFilesList : do not build list of files
--raw : Work with raw data files
-h : Print the help


EventViewer

To run the event display, go to the directory $OPBRICKFINDERROOT/run, and perform:

  #./eventViewer [-h] [-D] [-e <eventNumber>] [-i <fileName> | --data <path>]
                 [--list <fileName>] [--elist <fileName>]
                 [--notBuildFilesList] [--buildBrickMap | --notBuildBrickMap]


with the following comand line options:

-D  : Maximum PrintLevel
-e <eventNumber>  : Event number
-i <fileName>  : ROOT intput file
--data <path>  : Path to input data files directory (default: data/extractions)
--list <fileName>  : File list name (default: data/files_list.dat)
--elist <fileName>  : Events list name
--config <fileName> : Config file name
--muonRec <-1 - 4> : Muon reconstruction method
-1 - Automatic (default)
0 - Data file muon
1 - Hough transform
2 - Tracing method 1
3 - Tracing method 2
4 - Data file muon (without fitting)
--buildBrickMap  : Building map of brick
--notBuildBrickMap  : Do not build map of brick
--notBuildFilesList : Do not build list of files
--batch : Saving event pictures in batch mode
--raw : Work with raw data files
-h  : Print the help